Mr.Hobby MS232 Mr. Mark Setter 40ml 1L./122,50 €

It is possible to form a base color that helps the color development such as red.

● Ideal for making the final base before painting
Since the particles are fine and it is difficult to fill the mold, it is suitable for making the final base before painting.
● Drying speed is improved!
We use a solvent that dries faster than other surfacers to make it easier to get started with the finishing touches.
Excellent compatibility with Mr. Rapid Thinner, which dries quickly. The standard dilution ratio is 1:1.

Mr. Mark Setter is an adhesive component, which gives decals greater adhesion to plastic parts. It is much easier to affix decals to plastic model part where the parts either have a rough or irregular surface. First, the area to which the decal will be affixed is painted and then the decal is applied. After any air bubbles are removed by pressing on the decal with a cotton swab, a coating of Mr.Mark Setter is applied and allowed to dry. Because the decal now has a greater degree of adhesion, adhesive silvering (the floating and shiny quality of the clear parts of decals) will be greatly reduced or eliminated, and decals can be firmly affixed to uneven surfaces. It is perfect even for poorly made decals. Decals will have greater adhesion if the painted surface is prepared with a gloss finish.

Danger.....!!!! : flammable Product, keep out of reach of children, use in well ventilated areas, if the liquid accidentally comes into contact with the eyes, contact a doctor quickly, do not inhale, !!!