VMS VMSCM12 Flexy 5k CA For 3D , 20gr.

FLEXY 5K CA contact adhesive for 3D printed models

Glue for PLA resin and 3D printed models. Thanks to its formulation this glue can be used for gluing demanding 3D printed parts that require a lot of manipulation and extra strong bond. The formula of VMS Flexy 5K 3d is optimised for thermoplastic, including PLA resin so you can also glue multimedia models no problem, resin to polystyrene bonds will be as durable resin to resin ones. As the original Flexy 5K glue forms flexible bond that withstands much more punishment than classic brittle CA. This essentially means less accidentally lost parts and more productive and enjoyable work as there is much less need to reglue vulnerable parts. Extended open time (135% the standard CA) allows for good positioning of the parts. You also will be able to glue tricky parts that produce tension. For best results prepare parts with VMS Universal weathering carrier prior application of the CA glue.

Combine with: 3D printed parts

Recommended techniques: Apply with wire

Flexible CA bond!

Have you ever lost or have to re-glue some model parts during painting or weathering or maybe just by accident why manipulating your model? If so this glue is for you! Flexible bond created with Flexy 5k withstands much more punishment than classic brittle CA.

1.35x longer manipulation time

Extended open time of our photo etch glue (135% the standard CA) allows for good positioning of 3D printed parts. You will also be able to glue tricky parts (both PS and metal) that produce tension. Dispensed glue is "live" for over 45 minutes!

Not aggressive towards PS

Flexy is less aggressive and more easily removed when necessary it doesn't "eat plastic" as classic CAs. therefore it is more easily removed when needed. Most of the time simple scrubbing followed by some sanding will do and debonders will do even better job!